PMMA bone cement with L-arginine/nano fish bone nanocomplex for apatite formation.

Bone cement is one of the materials used in orthopaedics that serves various functions, such as binding bone implants, replacing damaged bones and filling spaces within bones. Various materials have been used to synthesize bone cement, and one promising material for further research is fish bone waste-based bone cement. This study investigates the potential of fish bone waste-based bone cement by incorporating nano fish bone (NFB) and L-arginine (L-Arg) protein into polymethyl methacrylate (PMMA) to examine apatite growth. NFB derived from the Salmo salar fish positively influences osteoblast cell proliferation and differentiation, while L-Arg enhances biocompatibility and antibiotic properties. The NFB/L-Arg combination holds promise in accelerating new bone formation and cell growth, both of which are crucial for fracture healing and bone remodelling. Tensile strength tests reveal the superior performance of BC-PMMA-1-NFB/L-Arg (36.11 MPa) compared with commercial PMMA (32 MPa). Immersion tests with simulated body fluid (SBF) solution for 7 days reveal accelerated apatite layer formation, emphasizing the potential benefits of NFB/L-Arg in bone cement applications.

Spidroin striped micropattern promotes chondrogenic differentiation of human Wharton's jelly mesenchymal stem cells.

Cartilage tissue engineering, particularly micropattern, can influence the biophysical properties of mesenchymal stem cells (MSCs) leading to chondrogenesis. In this research, human Wharton's jelly MSCs (hWJ-MSCs) were grown on a striped micropattern containing spider silk protein (spidroin) from Argiope appensa. This research aims to direct hWJ-MSCs chondrogenesis using micropattern made of spidroin bioink as opposed to fibronectin that often used as the gold standard. Cells were cultured on striped micropattern of 500 µm and 1000 µm width sizes without chondrogenic differentiation medium for 21 days. The immunocytochemistry result showed that spidroin contains RGD sequences and facilitates cell adhesion via integrin ß1. Chondrogenesis was observed through the expression of glycosaminoglycan, type II collagen, and SOX9. The result on glycosaminoglycan content proved that 1000 µm was the optimal width to support chondrogenesis. Spidroin micropattern induced significantly higher expression of SOX9 mRNA on day-21 and SOX9 protein was located inside the nucleus starting from day-7. COL2A1 mRNA of spidroin micropattern groups was downregulated on day-21 and collagen type II protein was detected starting from day-14. These results showed that spidroin micropattern enhances chondrogenic markers while maintains long-term upregulation of SOX9, and therefore has the potential as a new method for cartilage tissue engineering.

Biomimetic Janus chitin nanofiber membrane for potential guided bone regeneration application.

Biopolymer-based membranes are at the forefront of the guided bone regeneration (GBR) in orthopaedics and dentistry, which prevent fast-growing soft tissue migration to the defected alveolar ridge or implants and allow the bone regeneration. In this study, we fabricated a novel Janus -two-faced, GBR membrane composed of a chitin nanofiber face for bone regeneration and a cell membrane mimetic antifouling 2-Methacryloyloxyethyl phosphorylcholine (MPC) polymeric face for suppressing the migration of the soft tissue. In vitro cell study showed a higher cell proliferation rate of osteoblast cells on the chitin nanofiber surface and a lower proliferation rate of fibroblasts cells on the antifouling MPC side. An increased of Alkaline Phosphatase (ALP) rate was observed in the chitin nanofiber face, indicating the ability to maintain proliferation and differentiation of osteogenic cells. These results suggest the biomimetic Janus chitin membrane may have the potential to develop as an advance GBR membrane.

Tunicate-Inspired Gallic Acid/Metal Ion Complex for Instant and Efficient Treatment of Dentin Hypersensitivity.

Dentin hypersensitivity is sharp and unpleasant pains caused by exposed dentinal tubules when enamel outside of the tooth wears away. The occlusion of dentinal tubules via in situ remineralization of hydroxyapatite is the best method to alleviate the symptoms caused by dentin hypersensitivity. Commercially available dental desensitizers are generally effective only on a specific area and are relatively toxic, and their performance usually depends on the skill of the clinician. Here, a facile and efficient dentin hypersensitivity treatment with remarkable aesthetic improvement inspired by the tunicate-self-healing process is reported. As pyrogallol groups in tunicate proteins conjugate with metal ions to heal the torn body armor of a tunicate, the ingenious mechanism by introducing gallic acid (GA) as a cheap, abundant, and edible alternative to the pyrogallol groups of the tunicate combined with a varied daily intake of metal ion sources is mimicked. In particular, the GA/Fe(3+) complex exhibits the most promising results, to the instant ≈52% blockage in tubules within 4 min and ≈87% after 7 d of immersion in artificial saliva. Overall, the GA/metal ion complex-mediated coating is facile, instant, and effective, and is suggested as an aesthetic solution for treating dentin hypersensitivity.

Mussel-Inspired Anisotropic Nanocellulose and Silver Nanoparticle Composite with Improved Mechanical Properties, Electrical Conductivity and Antibacterial Activity.

Materials for wearable devices, tissue engineering and bio-sensing applications require both antibacterial activity to prevent bacterial infection and biofilm formation, and electrical conductivity to electric signals inside and outside of the human body. Recently, cellulose nanofibers have been utilized for various applications but cellulose itself has neither antibacterial activity nor conductivity. Here, an antibacterial and electrically conductive composite was formed by generating catechol mediated silver nanoparticles (AgNPs) on the surface of cellulose nanofibers. The chemically immobilized catechol moiety on the nanofibrous cellulose network reduced Ag⁺ to form AgNPs on the cellulose nanofiber. The AgNPs cellulose composite showed excellent antibacterial efficacy against both Gram-positive and Gram-negative bacteria. In addition, the catechol conjugation and the addition of AgNP induced anisotropic self-alignment of the cellulose nanofibers which enhances electrical and mechanical properties of the composite. Therefore, the composite containing AgNPs and anisotropic aligned the cellulose nanofiber may be useful for biomedical applications.

A rapid, efficient, and facile solution for dental hypersensitivity: The tannin-iron complex.

Dental hypersensitivity due to exposure of dentinal tubules under the enamel layer to saliva is a very popular and highly elusive technology priority in dentistry. Blocking water flow within exposed dentinal tubules is a key principle for curing dental hypersensitivity. Some salts used in "at home" solutions remineralize the tubules inside by concentrating saliva ingredients. An "in-office" option of applying dense resin sealants on the tubule entrance has only localized effects on well-defined sore spots. We report a self-assembled film that was formed by facile, rapid (4 min), and efficient (approximately 0.5 g/L concentration) dip-coating of teeth in an aqueous solution containing a tannic acid-iron(III) complex. It quickly and effectively occluded the dentinal tubules of human teeth. It withstood intense tooth brushing and induced hydroxyapatite remineralisation within the dentinal tubules. This strategy holds great promise for future applications as an effective and user-friendly desensitizer for managing dental hypersensitivity.

Marine hydroid perisarc: a chitin- and melanin-reinforced composite with DOPA-iron(III) complexes.

Many marine invertebrates utilize biomacromolecules as building blocks to form their load-bearing tissues. These polymeric tissues are appealing for their unusual physical and mechanical properties, including high hardness and stiffness, toughness and low density. Here, a marine hydroid perisarc of Aglaophenia latirostris was investigated to understand how nature designs a stiff, tough and lightweight sheathing structure. Chitin, protein and a melanin-like pigment, were found to represent 10, 17 and 60 wt.% of the perisarc, respectively. Interestingly, similar to the adhesive and coating of marine mussel byssus, a DOPA (3,4-dihydroxyphenylalanine) containing protein and iron were detected in the perisarc. Resonance Raman microprobe analysis of perisarc indicates the presence of catechol-iron(III) complexes in situ, but it remains to be determined whether the DOPA-iron(III) interaction plays a cohesive role in holding the protein, chitin and melanin networks together.